• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Change a Subaru Spare Key

If you have lost your Subaru car key, contact a locksmith. Usually, they will cut new keys for you cheaper than the dealer.

Fob remote "push to start" intelligent keys or a simple metal key are the two most common kinds of Subaru car keys. The Fob key is equipped with a chip inside and it will require reprogramming.

Keyless Entry System

The key fob can be used to lock and unlock your Subaru remotely. It also opens the trunk of your car or the lift gate. These remotes make use of the keypad inside your car to connect to your vehicle's computer.

Some models of Subaru come with a lesser-known feature called PIN Code Access. This lets you make a unique sequence of numbers to open and start your vehicle. If you have a newer subaru smart key Forester, Outback, Crosstrek, WRX, WRX STI or Impreza that has this feature, refer to the owner's manual to learn how to make use of it.

If your keys stop working, there's a good possibility that the battery in the key fob is dying. You can check the battery life of your key fob by using a portable tester or a multimeter that you have in your garage.

Next, you'll want to take the key fob out of its case and examine the circuit board that controls the transmitter. This board will have one or two sets of eight-digit numbers, so note down the first set so you will be able to remember it later. After you've completed that then put the key fob back together and you'll be able to start programming it at home. This process varies according to the model and year your car. However, it's generally simple enough to do yourself.

Key Fobs

subaru impreza key replacement's most recent models all come with key fobs that not only unlock your doors, but also turn on your lights, lock your gas cap, and even start your vehicle. That last trick is especially helpful if you've ever arrived at the gas station only to discover that your car isn't starting because the battery of the key fob was dead.

It's likely that your Subaru's key fob, regardless of whether it is old or new can be replaced easily. Keep in mind that some of the modern models, with their top-of-the-line technology, may require a visit to the dealer. With a little time and effort, you can have your replacement key for subaru forester key fob in place at home.

Begin by opening the case and inspecting the circuit board of the transmitter. (Instructions on how to open the case are usually found in the owner's manual). There should be one or two serial numbers with 8 numbers each. Keep the first set of numbers for later information.

After that, get in your driver's seat, and close all the doors. Turn the key ten times to start your car, then turn off. Press the lock button of your key fob, then open the door. This will confirm whether your doors are operating correctly. After that, close the door and remove the key from the ignition. The chime should be heard from your vehicle once more and indicate that the key fob has been programmed.

Ignition System

If your Subaru keys aren't functioning as they ought to it could be because the key battery is dead. If you have the knowledge, you can change the battery on your key fob yourself. A replacement battery is inexpensive and is fairly easy to locate. If your key fob won't respond to your commands, there might be another issue. It is recommended to visit a dealer for a spare key. They'll guarantee that the key is a genuine Subaru key that's under warranty and it'll be programmed to your vehicle. This is much safer and easier than buying an aftermarket key from a company on the internet.

You can also request that the dealer cut a new key if they are provided with your VIN number as well as proof of ownership. The information provided will be used to identify the replacement key so that it can be accepted by your immobilizer. This process is more complex than simply cutting a new key and dealers will typically charge more for this service.

After the new key has been programmed and you're able to swap it out with your current key. It will take only five seconds to insert the second key, which is why it's important to keep an operational key in your pocket. When the security light ceases to flash then you can take out the new key and test it to confirm it's working properly.

Battery replacement subaru key cost

Subaru fobs are very useful since they can turn on the power windows and sunroof of your vehicle with a single button press. However, the battery in the Subaru key fob is not designed to last forever and will eventually require replaced. This quick guide from Capitol Subaru will help you to replace the battery yourself.

To start you'll need to find the small crevice in the seam that divides the front and back of your key fob. You can then open the gap using an flat-head screwdriver to expose the small compartment that contains the battery. Install the new battery and ensure it is facing the right way. Remove the old one. Once everything is put together then you can use the new key fob to lock, unlock, and start your vehicle with ease!

Always have a spare set keys, especially if one is damaged or has been lost. A new key can be purchased at your local dealership for cars or you can request one made by a locksmith. It is important to ensure that your key fob works properly as soon you can so that you can drive safely.