• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain and durable, as well as long-lasting. In contrast to aluminium and timber, they don't get rusty or decay.

It is important to clean and oil UPVC windows and doors regularly. This will help avoid unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home and may even be fatal. It is important to make sure that your windows are in good condition.

For single pane windows it is fairly easy to replace them, and the replacement is usually able to fit into the frame of the previous one easily. If you have double-paned windows that are held together by internal beading, it will be difficult to remove and replace the old panes. In this case it is essential to purchase plastic spacers to help the new pane fit into the window frame.

If you're planning to attempt to remove the window panes by yourself it is crucial to wear appropriate safety gear, including thick gloves and upvc window repair eye protection. It is also an excellent idea to lay down a dropcloth before you start working on the glass so that any fragments of glass fall on the fabric instead of landing on the floor where they can be trampled on and cause further damage.

It's a great idea to seal the gap after the glass has been removed. This will stop drafts and water from getting into your home until a professional arrives to fix the window. This will also act as a barrier, preventing any intruders from getting access into your home. If the gap is large, you might be interested in a security door that has an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash window. In time, they could be affected by a variety of issues such as sliding. A sagging window in upvc window repairs near me can cause issues with light, draughts and even security. It's important to take action immediately if you notice your upvc window repairs near me windows are falling down.

Repositioning the hinges can help fix a window that is sliding. You'll first need to open the windows to get at the frame. Then, you can remove the hinges at the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after having relocated your hinges. If you're satisfied with the size of the window, tighten the screws to keep them in place.

If you can't reposition the hinges you may require replacing the seal. Rubber seals can dry out and lose their elasticity with time, causing them to loose their elasticity. If this happens, it's essential to replace the seal as fast as you can to ensure that your uPVC windows are waterproof and draught-proof.

uPVC handles can also become loose. This is usually due to screws that have become undone over time, but it could also be due to the mechanism of the handle wearing out. It's relatively easy to fix a loose uPVC hand. First, you'll need close your window and do a test fit. The corner joints of the sash must align with the casing joint. If it doesn't then you can use the screwdriver to loosen up the handle. Then, turn the mechanism into position.

3. Water Leaks

If you awake to wet floors and mouldy walls each time it rains, it's important to take action. The leaks of water through windows could cause structural damage to your home and also affect your ability to regulate the temperature of your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

It is a fairly easy fix that can be completed by any skilled DIYer. Based on the severity of the problem the caulking used previously might need to be removed before a fresh layer can be applied. It is important to remember that when it is about uPVC window repairs, do not be tempted to 'over-caulk in order to make the area more difficult to clean and reduce your energy efficiency.

It is essential to ensure that any drainage holes are free of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more serious instances, you might need to consider replacing the window.

Other indicators of water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. The is a fungus that thrives in damp conditions and can quickly spread across the house.

It is also important to remember that if the leakage originates from the glass in your double glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sagging. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and open with a breeze it could be hinges that are at fault. They can be replaced by any competent DIYer and are usually completed in just a few minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that use hinges and like any mechanical part they will wear out over time. Changing a window hinge is essentially a very simple process but it can be easier when you have a person to assist in holding the frame up.

It is also important to verify that the uPVC hinges are being opened and closed in the right direction. This can be done by checking for the arrows on each hinge, this shows which way the window should open.

The issue can be caused by opening the window incorrectly or by a poor installation in the factory. Sending us a photo through our website can often resolve the problem. We are more than happy to provide advice.

It is also crucial to lubricate the hinges regularly. This can be accomplished by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window operate and close more easily. It can also lower the possibility of a window getting stuck and stop corrosion. This is recommended to be done at least every year. WD40 and other solvent-based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different factors. The hinges can also be misaligned due to wear, which can cause an opening between the frame and sash. This can be easily repaired by giving them a thorough clean, however when they're beyond repair, it might be necessary to have them re-aligned or replaced. The second is the interlock, which is located on the hinge side of the window, can also become misaligned, again it is possible to just give them a good clean, but in some cases it might be necessary to have these replaced.

The seals may wear out or get damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glasses. This will help to regulate indoor temperatures and upvc window repair lessen the risk of draughts.

Another method of reducing draughts effectively is by using a draught-excluder. These are usually made of fabric tubes filled with a filler which can be hung over your window sill. These will help to keep cold air out and keep your home warm and cozy!

Your upvc windows can keep providing excellent insulation and security for your home by performing regular maintenance and repairs. However, it is important to recognize that windows last for a certain period of time and they may reach an point at which it is more economical to replace them than repair them. So, if you're experiencing issues with your Upvc window repair windows, it is always recommended to seek assistance from a professional immediately.