• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser Installation

Add a ghost 2 immobiliser cost immobiliser your vehicle to protect it from thieves. Our TASSA verified system protects vehicles against hacking, key cloning, and immobiliser bypassing.

The system is hidden within the wiring loom of your vehicle, so it is completely inaccessible to anyone looking. It works by creating a pin code push sequence through existing buttons on the steering wheel doors, door cards, and the centre console.

No circuit cuts

It's not surprising that car owners are keen to secure the vehicle they have worked so hard to buy. But, traditional security systems such as alarms and wheel locks can easily be snatched away or jumped by thieves. Ghost immobilisers are extremely effective solution that works in a quiet manner and can't be detected by modern thieves.

Ghost immobilisers or a hidden device is a device that connects to the data network of your vehicle's CAN to shut off the engine. It does this without the use of key fobs or radio frequencies. It communicates with the ECU of your vehicle via buttons on the steering wheel, dash and door panels. This creates an individual pincode that is only known by you. The code can be changed at any time and can be up to 20 digits in length, based on what you prefer. It also comes with a secure emergency code you can use if you forget your PIN.

The ghost immobiliser is beneficial to stop a relay box in your home from transmitting the signal from your car key, Autowatch ghost Immobiliser fitting which would open the doors and start your vehicle. It can even block new advanced methods of stealing your car such as OBD port hacking. The device is tiny and weatherproof, meaning it's difficult to see and even harder to tamper with.

Another benefit of the ghost immobiliser is that it can be put to your vehicle without permanent marks. It is ideal for those who are planning to sell their car in the near future. It's also faster and easier to install when compared to a factory-fitted model.

The Autowatch Ghost, autowatch Ghost immobiliser Fitting a groundbreaking technology, is a new generation device that prevents thefts of cars using contactless technology by connecting to a vehicle's CAN network and using the existing buttons to generate a unique PIN code. This is a hidden device that can be set up without removing wires, and does not require additional key fobs. It also connects to the vehicle's original ECU to prevent thieves from bypassing it by using new keys or replacing the ECU with an "relay". This system is TASSA verified and can be linked to an International Security Register, allowing owners to have peace of mind knowing their vehicles are safe from theft.

No RF scanning

You'll want to secure your vehicle from theft if have spent lots of money and effort to customize it. Installing an immobiliser is among the best ways to prevent theft. It will prevent your vehicle from beginning until you enter a unique code. Utilizing the buttons on your steering wheel and dashboard, you can create an up to 20 digits long which is only known by you, and ensure that only you can drive your vehicle. You can also set up a valet and service mode that allows you to temporarily start your vehicle without entering the PIN code. This allows your technician to work on your car without you being present. This is an excellent option for those who want to cut down on time and make their lives easier.

A ghost immobiliser is a new generation device that connects to your vehicle's CAN data network, and uses the buttons on the dashboard and steering wheel to program a personal PIN code. It is designed to be discrete without any light or sound to make it obvious and can be installed anywhere on the vehicle, without disturbing the aesthetics of your prized possession.

This stealthy device is TASSA approved and can reduce your insurance costs. It has a tracking feature that allows you to locate your vehicle even if it's gone missing. This is helpful if you have a costly or rare vehicle that you have invested lots of time making it your own.

The autowatch Ghost immobiliser fitting Ghost can be used together with an iPhone application that allows you to start your car remotely in the event you forget your PIN or are not able to enter the vehicle due to a reason. This feature is perfect if you have to do some errands, or pick up your children, but do not want to risk having someone else drive your car. This feature is useful in the event that you need to bring your vehicle in to be repaired or serviced.

The Ghost is unique in that it does not transmit or detect radio frequency and is therefore undetectable by thieves who employ RF scanning and code grabbing technology. It is also able to safeguard your car from key copying and ECU swapping as well as other typical methods of theft from cars.

No key to cloning

Ghost immobilisers are a fantastic option for protecting high-end vehicles. They are designed to block key cloning. They prevent your car from being started until a PIN code has been entered in conjunction with the regular key fob. This makes it very difficult for thieves to steal your vehicle, and may deter them from doing it initially. This is a good idea if your vehicle has been extensively modified or is an uncommon model.

These immobilisers are connected to the vehicle's onboard CAN network and are completely hidden meaning that there is no visible indication of its presence within the vehicle. It is also difficult to spot by using radio frequency scanning technology or code grabbing. This means that a thief will need to invest longer to get your car.

To bypass the system thieves must be aware of the pin code and the location of the Ghost. The pin code is specific to you and can be changed as many times as you want. The pin code you select is simple to remember, however, it is mathematically impossible for anyone else to understand. Additionally the engineer will provide you with an emergency pin code override in case you forget the pin.

The Ghost CAN bus immobiliser is weatherproof, and can be installed in any area of your vehicle. It is compatible with all vehicles and completely customizable to match the look of your vehicle. It is also very affordable and simple to use. You can even transfer the device to another vehicle if you change cars during the lifetime of ownership, as long as the new vehicle is compatible with it.

The CAN bus is compatible with other security features. For instance, it can detect the damage to your vehicle and warn the owner. It also can shut down the engine if the car is damaged. The system can protect your vehicle from hacking and key duplication. It also detects vibrations or contact with the vehicle. It can also notify the owner when the vehicle is moving.

No OBD port hacking

Ghost uses a hidden module that is connected to the CAN data network of your vehicle. This stops thieves from trying to hack into your vehicle to disable your alarm, disable your key fob, and code new keys. This technology is a significant improvement over the methods that were used by thieves to steal vehicles in the past. The CAN data network means that the system will not be affected by disconnecting or replacing your battery.

The Autowatch Ghost is the first aftermarket CAN bus non-detectable immobiliser that guards against key-cloning, hacking, and replica car theft. It does not utilize LED indicators or key fobs. Instead, it utilizes the buttons on your steering wheel, console, and door panels.

Modern thieves use diagnostics to detect cuts in the circuit on your vehicle and can bypass immobilisers that require a lot of wiring or are integrated into the wiring. The Ghost is weatherproof, does not require additional wiring and isn't detected by diagnostic tools of a professional. It can be even installed on vehicles with anti-theft equipment.

A Ghost immobiliser also has a significant benefit: your car can only be started by a person who knows your PIN code and physically has access to your vehicle. This is a major advantage over security systems that can be tampered with by simple cable tampering or a screwdriver.

If you forget your PIN, you can easily reset it by using the emergency PIN override function on a cell phone or computer. This is useful if need to start your car after it has been left in a garage or by using the help of a valet parking service.

The Autowatch Ghost 2 is the latest version of the product, and is insurance approved by TASSA when installed by one of our authorized installers. It has a QR fingerprint system to identify individual parts, which allows for the return of stolen items if they are found. It can also be switched to'service mode', which allows the engine to be started when your car is in a garage or with valet parking, however, you must enter your PIN code again to exit the vehicle.