• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they are not susceptible to rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help avoid unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large deal of damage to your home, making it very dangerous and potentially fatal. It is crucial to take the time to ensure that you are doing everything you can to ensure that your windows are in good condition.

Single-pane windows are fairly simple to replace and will usually fit into the old frames very easily. However when you have double glazed window repairs-pane windows that are secured by internal beading it will be more difficult to take out the existing panes and install new ones. In this case it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

Wearing eye protection and heavy gloves is essential if you plan to remove the glass yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes, so that any shards of glass fall onto the fabric, not onto the floor and could be trampled.

It's a good idea to tape the gap once the glass is removed. This will prevent water and drafts from entering your property until a professional arrives to repair the window. This also serves as an obstacle to stop criminals from getting into your home. If the gap is large, you may want to consider using a security door that has an integrated window repair (special info) as it offers the best of both worlds.

2. Sagging

uPVC windows and doors are a cost-effective, durable and energy-efficient alternative to timber windows made of sash. As time passes, they may develop a number of problems, including sliding. A sagging window in uPVC can cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to lose its shape, it's important to act quickly to prevent the problem from worsening.

To fix a window that is sagging you can try to reposition the hinges. You'll first need to open the windows so you can reach the frame. Then, remove both the hinges on the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. Once you've repositioned the hinges, shut your window and check for an appropriate fit. If you're satisfied with the fit of the window, tighten the screws to keep them in place.

If you are unable to reposition the hinges, you might require replacing the seal. As time passes, rubber seals lose their elasticity and dry out and cause their tightness to decrease. If this happens, it's crucial to replace the seal as fast as possible so that your uPVC windows are watertight and secure from draughts.

uPVC handles could also loosen. This is often caused by screws that have been removed over time, but it can be due to the handle mechanism getting worn out. Fortunately, it's easy to repair the loose uPVC window handle yourself. The first step is to close your window and do an initial test to ensure that it fits. The corners of the sash need to be aligned with the casing joint. If it isn't, you can make use of a screwdriver to loosen the handle, and then return the mechanism to its original position.

3. Water Leaks

If you wake up to wet floors and mouldy walls every time it rains it's important to take action. The leaks of water from windows do can not only cause degrading of the structure of your home but also hinder your efforts to control the temperature within your home. The most common cause for leaking uPVC windows is that the sealant around the frame has been damaged or not present.

This is an easy fix that can be accomplished by any DIYer who has the ability. Depending on the severity of the problem is, the old caulking might need to be removed. It is essential to remember that when it comes to uPVC window repairs, you should not be tempted to apply too much caulk in order to make the area more difficult to clean and Window Repair could reduce your energy efficiency.

Verify that the drainage holes are free of debris in them, and also ensure that the sill pan is properly angled to drain away from the window. In more serious instances, you may need to think about replacing the window.

Mold spots and rotten sills are other signs of water leakage. This fungus thrives under conditions of dampness and can spread quickly throughout the home.

If the leakage is occurring between the double-glazed window, it is more likely the issue is more with the seal than the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and blow open in a breeze, it may be hinges that are at fault. These are easily replaced by any competent DIYer and are usually done within a few minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that have hinges and, like all mechanical parts, they can wear down over time. Changing a window hinge is an easy process, but it's easier to do when you have a person to help you hold the frame in place.

It is also worth checking that the uPVC hinges are opening and closed in the right direction. You can check this by checking for the arrows on each hinge, this indicates which way the window should be opened.

The issue can be caused by opening the window incorrectly or by a poor installation at the factory. Sending us photos via our website will often resolve the problem. We are always happy to provide assistance.

It is also crucial to lubricate the hinges regularly. Applying an engineering lubricant that is light to the hinges is a good method of doing this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also prevent corrosion and reduce the possibility of sticking. It is recommended to perform this every year. WD40 and other solvent based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different things. The hinges, also due to wear and tear could become misaligned. This will cause gaps to develop where the sash meets the frame. These can be easily repaired by giving them a good clean, but in the event that they are beyond repair it may be necessary to get them aligned or replaced. In addition, the interlock could also become unbalanced. It is located on the hinge's side and may need to be cleaned. In certain instances it is possible to replace the hinges.

These seals are susceptible to wear and tear or become damaged over time, allowing air to escape. Installing high-quality weatherstripping is a good way to keep draughts at bay. Another option is to replace the upvc window with low-emissivity glass, this will help to regulate indoor temperatures and will reduce draughts.

The last way to reduce draughts effectively is by using a draught-excluder. These are usually fabric tubes filled with a filler, which can be put on top of your window sill. They can keep your home warm by blocking out cold air.

The windows made of upvc can continue to provide excellent insulation and security in your home with a little regular maintenance and repairs. However, it is important to recognize that all windows have a life span and eventually, they will reach an point at which it is more efficient to replace them than repair them. If you are experiencing issues with your Upvc window you should consult a professional immediately.