• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Reasons Why Your Nissan Qashqai Key Fob Won't Work

The Qashqai has a distinct SUV-like feel due to its larger dimensions, and the ride on 19-inch wheels in Ti and ST-L models may be a bit firm at times. Its front tyres can also lose grip on rough surfaces and its CVT may occasionally exhibit wrist-flexing torque steer.

This is usually the result of an unresponsive battery that can be replaced in just a few minutes. Make sure that the replacement battery is the same voltage, size and specifications.

Water Damage

One of the main reasons why a Nissan key fob will give the "key ID is not correct" message is due to water damage. The rubber seals on the key fob shield the electronic chip, but long-term exposure to moisture can cause it not to work correctly. This is often the case if you've dropped your key fob in the ocean or a swimming pools, Nissan Qashqai Key Fob but it could occur if it becomes wet from soapy hands or rain.

If your key fob is exposed to water for a long period of time, it might need to be cleaned with isopropyl alcohol or electronic cleaner. Or, it could need to be taken to a professional to repair or replace it.

If your key fob is in need to be replaced, it is a relatively simple procedure. Make sure you've got the correct multipack (CR2032 3V). Then open the back and front cases using a small flathead screwdriver. You'll need to take out the metal retaining clips and then push out the old battery, and then put in the new one. After reassembling your fob, put the mechanical key back into its place and make sure it functions as intended. If not it is necessary to bring it to a local Nissan dealer or an expert auto locksmith to fix the key chip. The chip isn't usually damaged by water and isn't too costly.

Dead Coin Battery

Another common reason your nissan key programming Qashqai key fob might not work is that the battery in the coin has gone dead. The batteries last for about 3 to 5 years, but they are prone to failure over time in the event that the fob has been frequentedly dropped. It is possible to replace the battery with a fresh one, but make sure that it's the same size and voltage as the original. If you're using another battery, it may cause the key to have an untrue key ID, which could prevent it from connecting to your vehicle.

The best way to replace the coin battery on the Nissan Qashqai key fob is by opening the fob with a small flat head screwdriver. The screwdriver should be inserted into a small notch on the bottom of the fob, and twist it gently to split the two halves of the key fob. Then, remove the old CR2025 button cell battery and insert an alternative one after taking note of its location on the fob.

Before putting the new battery into place be sure that there is no water damage or dirt on the terminals. If there is, wash the terminals using a small amount of isopropyl alcohol. Make sure that the pole cables are connected correctly. They should be connected to both the positive and negative poles of your battery.

Fault Diagnosis

If your Nissan Qashqai key fob stops working after exposure to pure rain or tap water it could be a sign of an internal chip issue. You'll require a new keyfob if you are unable to fix the issue by changing the battery. If the key fob didn't work after you dropped it, it's likely that the chip inside was damaged. If you clean the chip with isopropyl alcohol and paper towel and then replace it with the key fob, you'll generally get it working.

A common error that you will see on the dashboard of your vehicle is "Key ID Incorrect." The vehicle is unable to recognize the key fob and thus won't allow the vehicle to start. This issue can be caused by several ways, such as water damage, malfunctions that are not detectable within the key fob circuitry or RFID interference.

If the battery that powers 12 volts in your key fob is broken or is not supplying sufficient electric current it will cease to function. This can affect the remote keyless system and central locking in your Nissan Qashqai, as well as preventing you from starting your engine using the key fob (if equipped with Intelligent Key). If you're unable to lock or unlock the door by hand you must check the batteries in your key fob to make sure they're in good shape. You can also try re-inserting the battery to reset the transmitter.

Reprogramming

If the key fob was not submerged into saltwater it should be revived with a simple rinse of clean water. You might also try cleaning your electronic chip using isopropyl Alcohol or an electronic cleaner. If none of the above works then you might need to replace the key fob.

If your Nissan Intelligent Key still does not work, there may be a problem with the connection between it and your vehicle. To relink it, start by turning the key into the ignition without starting the car. Repeat this process until the hazard light flashes twice. Turn off the vehicle and remove the key.

Next, open the fob compartment in your vehicle. This is usually located in a door jamb, on the handle on the driver's side or underneath an armrest. Find the button that says "program" and press it. You should hear a chime after the process is completed.

It's time to put your Intelligent Key to the test. Stand some distance away from the vehicle, nissan Qashqai key fob then hit all the buttons on it. If the lights flash and the horn sounds this means that the key has successfully connected to the Nissan. It is also possible to test it in close proximity.