• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Repair a uPVC Window Frame

uPVC windows are long-lasting and last for decades. However, over time they can be damaged.

This damage can affect performance of the window. Fortunately, a lot of these issues can be fixed. This will save money on new windows and improve your home's comfort. The most frequent issues are:

Cracks

uPVC is a long-lasting plastic that is energy efficient and long-lasting, may crack over time. A cracked window is more than an eyesore; it can also let cold air in your home and increase your electric bills due to heat escaping through the crack. It's possible to fix the cracks in a uPVC frame without spending a lot and it can be done quite quickly.

The first thing to do is identify the cause of the crack. It could be caused by a sudden change in pressure, for instance when you open or close the window. This type of crack is referred to as a 'pressure crack' and is typically found on the edges of the window. It's important to fix the crack as soon you notice it as it could lead to water leakage and draughts.

Another reason for cracks in your uPVC window is if the window frame or sill has become out of alignment. This can be due to moving furniture, moving into a new house or even weather conditions like freezing temperatures. It is easy to fix this issue by drilling some pilot holes, and then running a line of silicone across the gap. This will stop any moisture from entering the window.

To keep your uPVC window frames looking nice and performing well, you should wash them regularly. This includes wiping down the frames with a white cloth that's been submerged in soapy or solvent water. Be sure to pay particular attention to the corners of the frame where dirt can accumulate. You can also make use of a Stanley knife to remove beads from the frame.

You should also lubricate your uPVC window's rollers and hinges to stop them from rattling every time you open or close the window. A ideal lubricant for plastic windows is WD-40 and can be purchased at most hardware stores. It is important that you wash the WD-40 off the window afterward, because it may scratch the surface of your uPVC window.

Draughts

Draughts are one of the most common issues that people face. These gaps allow cold air to enter the windows and can lead to more expensive heating bills and less comfort. uPVC windows often have effective seals against drafts, but over time these can fade or be damaged. If you notice gaps in your window it's easy to repair the issue applying self-adhesive foam or replacing the seal completely.

It is essential to keep uPVC windows clean and well-maintained to ensure they last as long as possible. To get rid of dirt, clean them using a soft, soaked cloth. Avoid using a cloth that contains dyes as this can stain the window frame. Also, ensure you don't clean your uPVC windows in direct sunlight, or they'll be left with streaky surfaces.

You can also lubricate the hinges of a uPVC window repair if they are slow or stiff to stop them from becoming misaligned. This will enable the window open and close with ease and eliminate any draughts. You can buy a variety of lubricants from DIY stores like B&Q or you can search for them online. Be careful not to over-lubricate because this could cause the hinges to loosen.

Another reason for drafty windows is that the window might not be aligned correctly with the frame. This could be due to a poorly installed window or natural movement over time. Check if this is true by shutting and opening the window to look for any gaps. If there are any gaps, it's recommended to have the window replaced as soon as possible to avoid any further damage.

There are a myriad of reasons that uPVC is so popular with homeowners and businesses. They are cost-effective, safe and offer great insulation. They can even improve the value of a house which makes them a good investment. uPVC can be damaged, so it is important to know how they can be repaired.

Loose or broken hinges

The most frequent cause of window problems with upvc is broken or loose hinges. It is possible to fix this by replacing the hinges which will resolve the issue and allow you to open and close your window in the same way as before. This is a low-cost simple, quick, and easy repair that will save you money on replacement windows.

Our windows made of upvc are fitted with friction hinges. They are typically used on side hung windows but can also be used on top-hung windows as well. They are available in either a 13mm or 17mm stack. If there are gaps in the sash or when the sash is difficult to open, they are typically replaced.

When installing a new upvc window hinge it is essential to follow the instructions and opening direction. An arrow is visible on the hinge. The arrow should be pointed in the direction of the opening in order for the window to function correctly. Please contact us if you are unsure which type of hinges to purchase. We will be happy to offer advice.

Lubricating your window hinges on a regular basis is vital. It will enable the sash slide open and close easily and prevent cracking or warping of the window made of upvc. Use a light engineering lubricant with corrosion inhibitors to grease your upvc windows hinges. This is recommended to be done at least twice per year.

This is an excellent way to keep your window in good condition. Also, make sure that the hinges do not appear to be loosened or broken. Small adjustments to the screws will be made to fix this issue and you will not have any further issues with your upvc window.

This is a fairly easy repair, but it will take you some time to determine the correct screw size to tighten them with. It is worth noting that screws can become loose if they aren't frequently used, and therefore they must be checked and tightened every year.

Physical Damage

While uPVC windows are durable and long-lasting, they need some attention. Regular maintenance can avoid problems such as water leaks and draughts. It can also improve the comfort and energy efficiency of your home. It is recommended that you hire a qualified glazing company for this kind of job, as they have the experience and tools to do the job right. Look for local glaziers on the TrustATrader website, or ask friends and family members for suggestions.

One of the most prevalent indicators that your uPVC windows require repair is a crack. It is usually caused by air pressure changes and is often visible. The cracks are typically located near the edges of the window. It is essential to repair a damaged window as quickly as possible to prevent further damage and increase the lifespan of your window.

Another problem is if the window sash becomes loose. This can create gaps between the window frame and glass which allows cold air to enter your home, while warm air escapes. This problem can be caused many ways such as by children's play or harsh weather conditions. If you notice that your sash is loose, it's best to contact a professional to fix the issue right away.

uPVC window hinges can be quite loud particularly if they're not maintained properly. Keep the hinges lubricated with WD-40 or a similar product. This will stop the squeaking and will make your uPVC windows quieter. It's also a good idea to include regular cleaning of the uPVC track and wheels into your maintenance schedule.

When you're deciding which company to hire for your uPVC window repairs, make sure to choose one that has a good reputation and is insured and licensed. It is also important to find an approved glazier who's experienced in working on uPVC frames and has the right tools for the job. Compare quotes from various firms to determine the most affordable price.