• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser Installation

Install a ghost immobiliser on your car to safeguard it from car thieves. Our TASSA-verified system protects against key cloning, hacking, and bypassing the vehicle immobiliser.

The system is hidden inside the wiring loom of your vehicle making it totally invisible to anyone who sees it. It operates by creating pin code push sequences that are activated by existing buttons on steering wheel, door cards and the centre console.

No circuit cuts

A car is a precious asset that you put in many years of effort to get, which is why owners want to protect their vehicle from theft. But, traditional security systems such as alarms and wheel locks can easily be cut off or taken over by thieves. Ghost immobilisers are a extremely effective solution that works in a quiet manner and isn't easily detected by modern thieves.

A ghost immobiliser birmingham immobiliser is a hidden device that connects to the CAN data network of your vehicle to disable the engine, without the use of radio frequencies or key fobs. It communicates with your vehicle's ECU by using buttons on the steering wheel, dash, and door panels to generate an unique pin code that only you are aware of. The code can be altered at any time and can be up to 20 digits long, depending on your preference. It also has an emergency code that you could use in the event of forgetting your PIN.

The ghost immobiliser could also be used to block relay boxes from transmitting the signal of your car's key from inside your home, which could open the doors and begin the vehicle. It could even block advanced methods of stealing your vehicle such as OBD port hacking. The device is tiny and weatherproof, meaning it's difficult to see and is also difficult to alter with.

The ghost immobiliser also has an advantage: it can be installed in your vehicle without leaving permanent marks. It is ideal for people who plan to sell their vehicle in the near future. It is also much quicker and easier to install compared to a factory-fitted unit.

The Autowatch Ghost, a cutting-edge new generation device, stops thefts of cars using contactless technology by connecting to the CAN network of a vehicle and using the buttons to generate an unique PIN code. This is a stealthy device that can be installed with no wires cut and doesn't require any additional key fobs. It also connects to the vehicle's original ECU, preventing thieves from gaining access by using new keys or replacing the ECU with a "relay". This system is TASSA certified and is linked to an International Security Register, allowing owners confidence that their vehicles are protected against theft.

No scanning with RF

You will want to protect your vehicle from theft if you have spent an enormous amount of money and time customizing it. One way to accomplish this is to install an immobiliser. This will prevent your engine from running until you enter a unique PIN. By using the buttons on your steering wheel and dashboard, you can generate an apex of 20 digits long that is only known to you, and ensure that only you can drive your vehicle. You can also set up a valet and service mode that will allow you to temporarily start your car without having to enter the PIN code. This allows technicians to work on your vehicle, without being present. This feature is ideal for those who want to cut down on time and make their lives easier.

Ghost immobilisers are new generation device that connects to your vehicle's CAN data network and uses the buttons on the steering wheel and dashboard to programme a personalised PIN code. It is designed to blend into, as it does not emit any sound or light indicator. It can be put in anywhere on your vehicle without impacting the appearance of your vehicle.

This stealthy device is TASSA approved and can cut down on your insurance costs. It comes with a tracking feature that will locate your vehicle even if it's gone missing. This is great when you own a unique expensive car that you've put many hours customizing.

Autowatch Ghost, in conjunction with the iPhone application, allows you to remotely start your vehicle when you've lost your PIN or are unable get into your vehicle. This feature is great for those who need to take your kids to school or run errands, but don't want to risk having someone else drive your vehicle. It is also helpful if you need to take your vehicle in for servicing or repair.

The Ghost is unique in that it doesn't transmit or detect radio frequencies and is therefore undetectable by thieves who employ RF scanning and code grabbing technology. It can also safeguard your car from key copying and ECU swapping which are the most typical methods of theft from cars.

No key cloning

Ghost immobilisers are a great option for protecting high-end vehicles. They are designed to block key replication. They stop your vehicle from starting unless a PIN code is entered in conjunction with the regular key fob. This makes it difficult for thieves to rob your vehicle, and may deter them from doing it initially. This is a good idea in the event that your vehicle has been extensively customized or if it's an uncommon model.

These immobilisers connect to the vehicle's CAN data network and are completely hidden which means there is no visible sign of its presence within the vehicle. It is also impossible for a burglar to detect the device by using radio frequency scanning or code grabbing technology. This means that a thief will need to invest a lot more time in order to successfully get your vehicle.

A criminal will need to be aware of the unique pin sequence and the exact location of the ghost to get around it. However, the pin code is unique to you and can be changed as often as you like. The pin code you select is easy to remember however, it is mathematically impossible for anyone else to figure out. In addition the engineer will have provided you with an emergency pin code to override if you ever forget the pin.

The Ghost CAN Bus immobiliser is able to be easily mounted anywhere on your vehicle. It is compatible with any vehicle and can be completely customized to match your vehicle's appearance. It is also affordable and easy to use. You can even transfer the device to a different vehicle if you decide to change cars during the lifetime of ownership, providing that the new vehicle is compatible with it.

The CAN bus is compatible with other security features. It can, for example, detect damage to the vehicle and notify the owner. It could also shut down the engine in the event that the vehicle has been damaged. It also helps protect your vehicle from hacking and key cloning. It also detects vibrations and contact with the vehicle. It can also notify the owner if the vehicle is moved.

No OBD port hacking

Ghost utilizes a hidden module that is connected to the CAN data network of your vehicle. This will stop thieves from trying to hack into your vehicle to disable your alarm, turn off your key fob, or create new keys. This technology is a significant improvement over the methods that have been employed by thieves in the past to steal your vehicle. The CAN data networks means that your system won't be affected if you disconnect or change your battery.

The Autowatch Ghost Immobiliser Fitting Ghost is the first immobiliser for CAN bus aftermarkets in the world, guards against key-cloning, hacking, and replica car theft. It does not use LED indicators or key fobs, instead using the buttons in your steering wheel, centre console and door panels to let you create a unique PIN sequence (up to 20 button presses) which must be entered prior to when you can drive your car away.

Modern thieves can employ diagnostics to find circuit breakages in your vehicle. They can bypass immobilisers that require a lot wiring or autowatch Ghost immobiliser fitting are integrated into the wiring. The Ghost is weatherproof and does not require any additional wiring. It is not able to be detected by diagnostic tools of a professional. It can be even installed on vehicles with anti-theft systems.

A Ghost immobiliser comes with a major advantage: your vehicle will only be started by someone who knows your PIN and has physical access to your vehicle. This is a significant advantage over traditional security systems which can be tampered with by simple modification of cables or a screwdriver.

You can easily reset your PIN if forget it by using the emergency PIN override feature of mobile phones or computers. This is useful if you are looking to start your vehicle after leaving it in a garage, or with the help of a valet parking service.

The Autowatch Ghost 2 has been approved for insurance by TASSA and is able to be installed by our authorized installers. It has a QR fingerprint system to identify individual parts, which allows for the return of stolen items in the event that they are found. It can also be turned into a service mode' which permits the engine to be started when your car is in a garage, or with valet parking, however, you must enter your PIN code once more to exit the vehicle.