• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain, durable and long-lasting. Unlike timber and aluminium, they do not rust or rot.

It is crucial to wash and oil UPVC windows and doors on a regular basis. This will reduce repair costs as well as improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home, and could even be fatal. It is essential to take the time to make sure that you are doing everything you can to keep your windows in good repair.

For single pane windows, it can be relatively simple to replace them, and the new window will generally fit within the frame that was previously installed easily. If you have double glazed window repairs-paned windows which are held together by internal beading, it is harder to remove and replace the old panes. In this instance you'll need to locate some plastic spacers that will help the new pane to fit properly into the window frame.

If you plan attempt to remove the window panes yourself it is important to wear the proper safety gear, including thick gloves and eye protection. It is also a good idea to lay down a dropcloth before you start working on the glass so that any fragments of glass fall onto the fabric instead of onto the floor where they could be trampled on and cause further damage.

It's a great idea to seal the gap after the glass has been removed. This will stop water and drafts from entering your home until a professional is able to repair the window. This will also provide an obstacle to stop intruders from getting into your home. If the distance between the window and the door is large, you might want to use security screens that includes windows. This will give you the best of both.

2. Sagging

Upvc windows and doors are an affordable, durable and energy-efficient alternative to timber sash windows. However, over time, they may be afflicted by a variety of issues, including sliding. A sagging window can cause problems with light, draughts, and even security. It is crucial to act when you notice your uPVC windows are falling down.

Repositioning the hinges could aid in fixing a window which is sagging. To do this, you'll need open the window so that you can access the frame. Then, you can remove the hinges at the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after having moved your hinges. If you're satisfied with the fit, tighten the screws to ensure they remain in the right place.

If you can't reposition the hinges, you might need to replace the seal. Rubber seals can dry out and lose their elasticity with time, causing them to loosen. If this happens, it's important to replace the seal as soon as you can to ensure that your uPVC windows are waterproof and draught-proof.

UPVC handles can also loosen. The majority of the time this is due to screws that have come loose over time. However, it could occur because the handle mechanism has been worn out. It's fairly simple to repair a loose uPVC handle. First, you'll need close the window and then perform an experiment fit. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn't you can use a screwdriver to loosen up the handle. Then, turn the mechanism back into place.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains it is important that you take action. Water leaks through windows can cause structural damage to your home and impact your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a simple fix that can be done by anyone who is a DIYer with the skills. Depending on the severity of the issue the old caulking may require removal before a new layer can be applied. When it is time to uPVC repair, you must avoid 'over-caulking'. This will make your window more difficult to clean and decrease its energy efficiency.

Verify that the drainage holes are free of debris in them, and also ensure that the sill pan is properly angled to allow the water to drain from the window. In more serious cases you may need to think about replacing the window.

Other signs of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. The fungus thrives in damp conditions and is able to quickly spread throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely the issue is more with the seal rather than the frame. It is also possible to be fixed by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open or if it opens with the breeze. These are easily replaced by any competent DIYer and are usually completed in just a few minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they can wear down over time. Changing a window hinge is essentially a very simple process, but it's easier with someone else to help hold the frame in place.

It is also worth checking that the uPVC hinges are opened and closed in the correct direction. Look for the arrows on each hinge to determine which direction the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window a certain way or due to poor installation at the factory. Sending us a photo via our website is often enough to solve the issue. We are always happy to provide advice.

Regular lubrication of hinges is also essential. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window to open and close more easily. It can also stop corrosion and decrease the chance of sticking. This must be done at a minimum once a year. WD40 or other solvent-based lubricants should not be used as they can damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a few different factors. First, the hinges because of wear and tear, could become misaligned. This can cause gaps to develop where the sash meets the frame. If they're beyond repair, it may be necessary to get them re-aligned. In addition, the interlock could be misaligned. This is located on the hinge's side and may need to be cleaned. In some cases it is possible to replace them.

The seals may wear out or get damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc window repair near me windows with low-emissivity glasses. This will help control indoor temperatures and decrease the possibility of draughts.

One of the most effective ways to cut down on drafts is to use a draught excluder. These are usually fabric tubes filled with some kind of filler. They can be placed on top of your windowsill. They can help block out cold air and keep your home warm and cozy!

Your upvc windows can continue to provide excellent insulation and security to your home with regular maintenance and repairs. It is essential to remember that all windows will eventually become worn out, and it is cheaper to replace them instead of fixing them. If you encounter any issues with your Upvc window you should consult an expert immediately.