• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

When It's Time to Repair Windows

If your windows are in need of repair, it's important to work carefully. Wear safety goggles and gloves to protect yourself from glass fragments.

A quick fix for a window that is broken is to put an aluminum cover over the crack. This will stop rain, snow and insects out of your home.

Cracked Glass

Cracked window glass not only makes your home less attractive, but it can also let drafts and other elements to enter the home. It doesn't matter if cracks result from an impact, like soccer or baseball or a stress like an abrupt temperature drop, but it is essential to have them fixed as quickly as you can to prevent further damage and to keep your windows working properly.

Use clear tape to cover your damaged window if it is not damaged. This is a quick, low-cost solution to shield your window from water, dust, bugs, and other debris. It also shields your windows from the elements.

If the crack is getting larger or has become large, it is recommended to speak with an expert. A professional glazier can determine the root of the crack and recommend the best repair procedure.

A crack caused by an impact is the most common kind of window break, usually resulting from a solid object striking your window with enough force to fracture it. These cracks usually display a starburst of lines and broken pieces. They could be dangerous in the event that they become loose. This crack can compromise the gas between the panes of your double-pane windows and reduce its energy efficiency.

Stress cracks are a different kind of crack that develops over time as a result of extreme temperature fluctuations and other environmental factors. These cracks start around the edges of your window, and eventually enlarge into full-blown breaks.

A pressure crack is a much more serious crack, but it can still be repaired. It is a curvy straight line that can stretch across the window on one or more sides. It is caused by low or high pressure which can cause the glass to expand or contract.

There are other products that can be used to repair cracks in glass when you're willing to go beyond nail varnish and tape. Glass Repair Film, while more expensive, will give your windows more protection and durability. If you prefer to make it yourself, epoxy is an adhesive that can be used to fill in cracks and prevent further damage. It can make your upvc window repair appear like it never had any cracks at any point.

Leaking Windows

If you see an area of dampness under your window, or you notice that the wood around it is weak or rotting, it could be time to start a windows repair project. In excess moisture, it creates an ideal environment for mildew and mold, which can cause a variety of issues for your home. They can affect the quality of air inside, contribute to sagging of drywall and increase the severity of allergy symptoms. Unchecked, they may also cause structural damage to your home.

It is recommended to contact a professional if the water is visible or comes from the outside. Don't put off leaking windows. They are the most frequent cause of mold and structural damage.

In many instances the use of caulking is to stop leaks. Before applying the caulking, you'll have clean the area and take off any caulking that is in place.

Check the weepholes on the frame for any debris. These holes are designed to drain excess rainwater but can become clogged over time with insect corpses or other debris.

If you have double-paned windows, you'll also need to inspect the seal between the glass and the frame. This will help to maintain an airtight seal between the glass panes and help make the windows more efficient. As time passes the seal may get worn out and let water into your home.

Water stains on walls and ceiling are another indication of a leak. They occur when the drywall is saturated with moisture which weakens the fibers and leads to discoloration. Peeling paint is another indication of water affecting the adhesive properties of the paint and pulling it away from the wall.

Faux Muntins & Mullions

In the past, mullions and muntins (or glazing bars in the UK) separated and held panes of glass in classic multi-pane windows. Since the larger expanses of tempered glass became available after WWII they went out of fashion. They're mostly used as a decorative element in a few older homes.

The effects of rain or wind can harm a single support or a small group, leaving an opening in the window. The good part is that you can repair the majority of these decaying or brittle elements.

First take a rag and clean the affected areas. Make use of ammonia-based cleaning products that does not leave traces. Take off any rotting or loose pieces and cut the intersections of the horizontal and vertical window muntins using an exact knife. After trimming the intersections, use painter's masking tape to seal off the lower section of the window frame. Now, you're able to apply a thick layer of white paint, paying special attention to the areas that were lightly coated in the first pass. Allow the paint to dry completely before taking off the tape and applying another coat.

If the issue is more serious, such as an hourglass-shaped crack in the middle of the window, it's recommended to replace the sash. In such cases you'll have to search for a replacement that is similar to the window that is in place in terms of style and size.

Installing grid windows is a cheaper alternative. These windows are made of a glass pane with a series muntins, which are glued to the surface. This creates a split appearance. They're not as energy-efficient as traditional windows, however.

If you're looking for a simple method to upgrade your windows, consider installing a new drip cap in order to stop water from getting into the window frame. The majority of home centers sell drip caps made of aluminum for around $20. They're much easier to install than an alternative window sash, and they'll provide you with the same functions as an authentic muntin or mullion.

Broken Sashes & Frames

A broken window sash should be a signal that you need to seek help. A sash that is broken ignored, could lead to water leaks, wood rot, and other serious problems to the frame and sill. If you've got a damaged sash, replace it as soon as possible to ensure that the window is properly sealed.

The problem is often caused by worn-out or improperly installed cords. It's easy to replace these cords in the majority of double-hung window models. First, you'll need to remove the metal tabs holding the sash. Push up on the other side of the sash (it isn't important which side) and then pull it towards the opposite side in order to pull it out. You'll need to remove the parting strip that separates the sash from the other side so that you can get to the area where the sash cords are located.

After you've removed the sash, it's important to be sure to look at its metal tabs and compare them to the tabs on your new sash. If they're not the same it's difficult to put the new one in its slot and affect how the sash operates. Fortunately, this issue can be rectified by placing tabs in their proper places on your new window.

In addition to the sashes, you'll be required to inspect the frame of your window for damage or rot. It's a good idea to do regularly, as wood shrinks and wears down over time. If you spot any visible damage it should be fixed as quickly as possible to prevent a bigger problem from developing.

If your window frames have begun to deteriorate, you can treat them with a homemade preserver created of half mineral spirits and boiling linseed. After the treatment has dried for two full days, you can finish your frames with high-quality latex paint. A fresh coat of paint can also shield your window from the elements.