• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

how to replace lost subaru key to Change a Subaru Spare Key

If you have lost your Subaru car key, you should call a locksmith. Locksmiths can usually cut you a key cheaper than the dealer.

Fob remote "push to start" intelligent keys or a plain metal key are the two most common kinds of Subaru car keys. The Fob key will need to have its chip changed.

Keyless Entry System

The key fob can be used to lock and unlock your replacing subaru key remotely. It also opens the trunk of your car or the lift gate. These remotes use the keypad of your car to connect to the computer in your vehicle.

Certain models of subaru key fob upgrade have a feature that is not widely known called PIN Code Access. You can make a custom number sequence to start and unlock your car. If you own a newer Subaru Forester, Outback, Crosstrek, WRX, WRX STI or Impreza which came with this feature, refer to your owner's manual to see how to program subaru key to use it.

If your keys stop working, there's an excellent chance that the battery in the key fob is dying. The first thing to do is make sure that it's got new batteries and you can accomplish this with a portable remote tester or a basic multimeter that you can find in your home garage.

Next, you'll want to take the key fob out of its case and inspect the circuit board of its transmitter. You'll be able to see one or two sets of 8 numbers. Note the first set so that you can recall it. Once you've done that you can put the key fob back together and you'll be ready to start programming it at home. The procedure for programming differs based on the make and year of your vehicle, but it's usually simple enough to accomplish yourself.

Key Fobs

Subaru's latest models come with key fobs that don't just unlock your doors but also turn on your lights, lock the gas cap, and start your vehicle. This is especially useful if you have ever found yourself at the gas station and your car won't even start because the battery inside the key fob has died.

No matter if your Subaru is old or new it's likely that the key fob can be replaced with little difficulty. Remember that some of the most modern models, with their top-of-the-line technology, may require an appointment with a dealer. With just a bit of effort and time, you can create your own key fob replacement.

Begin by looking at the circuit board that controls the transmitter on your key fob (instructions for opening the case should be included in your owner's handbook). There should be two or more serial numbers of 8 digits each. Keep the first series of numbers on hand for future references.

Next, climb into your driver's seat and close all the doors. Turn the key to start the vehicle, then turn off after ten revolutions. Press the lock button on your key fob and open the door to check that all of your doors function properly. Then close the door, and remove the key from the ignition. You should hear the chime from your vehicle again and indicate that the key fob is programmed.

Ignition System

If your Subaru keys aren't functioning as they should it could be because the key battery is dead. If you have the knowledge, you can replace the battery in your key fob yourself. A replacement battery is inexpensive and easy to locate. If the key fob isn't responding to your commands It could be an issue with a different cause. If you want to get a replacement, it's best to go to an authorized dealer. They'll ensure that the key is an original Subaru key that is under warranty, and that it will be programmed for your vehicle. This is a lot simpler and safer than getting an aftermarket key from a company online.

You can also have the dealer cut a brand new key if they are provided with your VIN and evidence of ownership. They'll use this information to create a code for the Replacement Key Fob Subaru key so that it can be recognized by your immobilizer. This process is more involved than simply cutting a new one, and the dealer will typically charge a higher price for this service.

Once the new key has been programmed and you're able to change it over to your existing key. You'll have only five seconds to insert the second key, which is why it's important to keep a working key handy. You can remove the key after the security light stopped flashing and you can test it.

Battery Replacement

Subaru fobs are extremely beneficial because they can switch on the sunroof and power windows of your vehicle with a single button press. But, the battery in your Subaru key fob isn't designed to last forever and will eventually need to be replaced. This short guide from Capitol Subaru will help you to replace the battery yourself.

To begin, you'll need to locate the small crevice in the seam that separates the front and back of your key fob. You can open this seam using a flathead screwdriver to reveal the small compartment that contains the battery. Remove the battery that was in it, and then insert a new one, ensuring that it is facing the right side up. After you've put everything together you can use the new key fob to lock, unlocking, and starting your vehicle.

It's always best to have an extra set of keys on hand especially if you've lost one or not functioning properly. You can buy a new key from your local dealership or get it cut by a locksmith. It's important that your key fob is working well as soon as possible to ensure that you are able to drive safely.