• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace a UPVC Window Handle

If the window handle of your upvc is damaged, don't be concerned. Replacing a window handle made of upvc is a relatively simple task and can be completed in just a few steps.

No matter if you have an in-line or a cranked espagnolette window handle, they all have an oval spindle protruding out of the back plate. This spindle is then slotted into the locking device.

Identify the type of lock and handle

Over time, window handles and locks can become damaged or lose their function. The good news is that this can often be fixed without having to replace the entire window unit made of uPVC. The first thing you need to do is determine the size and type of your handle and lock. This will allow you to determine the replacement parts you require.

You can identify the kind of handle by looking at the base. A screw or pin will secure the handle to its base. If the screw is gone, it could be a sign the handle has separated from the base section. If the handle has been split in the middle and is no longer able to grip the spindle, it could also indicate that it needs replacement.

There are many uPVC handles, but the Espag handle is the most popular. They are usually fixed with two bolts, and the spindle engages the locking mechanism of the window frame. These handles are typically used on uPVC tilt and turn windows.

Another type of uPVC window handle is the Cockspur handle. These are similar to the Espag handle, however they are a little further from the frame. These handles are generally used on older uPVC window frames.

Finally, there are also Venetian window handles that are similar to the Espag handle, but they have flat bases that allow them to be positioned flush with the frame. They are a great option for homeowners who are looking for an elegant, stylish handle that blends with their uPVC window frames. They are available in a variety of colours that will match any design.

Measure the spindle

It is important to be aware of how the handle fixed in place before ordering a replacement. This will tell you if it's too tight or loose, and also if it can fit into the window frame. This can be done by identifying the handle's type and determining the spindle's measurement. The spindle is a metal shaft that connects the handle to the lock inside the window frame. The spindle comes in various sizes. The current standard for the industry is 8mm. Older handles could have a 9mm cross-section therefore it's important to determine the cross-section of the old one to ensure you get the right size replacement.

There are many types of Window panel replacement handles. The most common are the inline Espagnolette handles and Cockspur handles. These handles operate a locking mechanism in the window, using shootbolt rods that secure the window replacements when it is closed. They are held in place with pins or screws based on the type of handle you've got.

You can find replacement window seals handles for windows made of upvc online and in most DIY stores. They are available in a variety of finishes and are suitable for both new or replacement glass for window windows. They can also be key-locking or fire-escape non-locking for additional security.

To remove the old handle, simply open the window towards the door and then remove all screws that hold it in place. Be careful not to damage the screws, and keep them safe in a container for later use. Once the screws are removed, remove them carefully from the handle. Measure the distance from the base of the spindle to its end. This will give you the necessary information to purchase the right replacement. The spindle of the handle is the metal shaft connecting it to the gearbox for locking in the window frame.

Take off the handle from the old one.

Switching the handle of a uPVC window handle is a straightforward job that usually requires less than five minutes using the right tools. The first step is to identify the type of lock and handle, which will help you determine the best replacement window pane. Then, you can measure the spindle to determine if the handle is suitable. The old handle will need to be removed and replaced with the new.

Most uPVC handles have inline Espagnolette handles. These handles have central spindles that slot into the locking mechanism of the window. They are generally easily removed, but might require force if become stuck. There are typically two screws that hold the handle in place which can be removed with a screwdriver or pliers. You may also need to remove pins, depending on the kind of handle.

Once the screws are removed After that, you can take off the old handle. The top of the base plate should be visible when the handle is in an open position, revealing two screws you can remove. If the sticker remains in place, you'll need to take it off.

Utilizing the screws from the handle, you are now able to put the new handle in place. The screw holes should be aligned on the window with the holes in the handle. Once you've done this you can put on the caps on the screws and then test the new handle to make sure that it is working properly. It's easy to change a uPVC handle, but you have to do it correctly.

Install the new handle

If you've been able to successfully remove the existing handle from the frame, it's time to install your new one. Begin by locating the screw covers and levering them out using your screwdriver. Once removed, place them in a safe place and move on to the next step.

Next, place the new spindle inside the handle by aligning it with the hole already in place and screwing it in. Make sure that you align the holes in the handle with the holes in the window frame. Also, use a screw of the same length as the ones previously used, or it could result in the handle not being secure.

uPVC Espag handles are fitted with a square 7mm spindle that turns the lock mechanism attached to the window. This handle style is used in most modern uPVC Windows. uPVC Cockspur (also known by the name Cotswold) handles feature an extended, curving nose that locks onto the frame's outer or cross member of the transom bar. They are often found on older uPVC windows replacement.

Once the new handle is in place, it's important to ensure that it operates properly by locking and unlocking the window several times. If everything goes according to plan, your replacement uPVC window handle should now be secure and functioning smoothly. If not, the steps listed above will allow you to identify any problems and get it fixed quickly. If you're having trouble with your uPVC handle or have any other issues with your home improvement using glazed, don't hesitate to contact us at Bridgewater Glass for professional assistance. Our glaziers are certified to repair or replace a variety of window frames and handles which makes us a great choice for your double-glazing needs.

Test the new handle

Over time, uPVC handles can get damaged and worn out. This can make them less secure and effective and therefore it is important to replace them as quickly as you can. It's also an ideal idea to do this after you upgrade your windows, since changing your lock and handle will maintain the integrity of the windows you have just bought.

There are a variety of styles of uPVC window handles. Some are fixed by screws or pins, while others feature blades that fit into the lock mechanism. Each type has a distinct method of replacing it, and you'll need to know which one you have.

Espag window handles are the most popular kind, and are typically found on newer uPVC windows. The spindle extends from the handle to the lock gearbox and activates the locking mechanism when you open the window. They're also easy to remove, but you should be careful not to harm the mechanism or the handle when doing so.

Cockspur window handles are another popular choice for uPVC windows. They're fixed by a spur that hooks onto an elongated striker plate that is attached to the frame. When you close or tilt the window, it engages the locking mechanism. This kind of handle can be more difficult to repair than others, but is still a good option for the majority of homes.

Venetian window handles are fixed by two bolts and feature a slim projection from the frame, unlike the Espag handle. They're ideal if you want an flush handle that blends with your uPVC windows. They're an excellent choice for commercial and residential buildings.