• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain, durable and window repair long-lasting. They do not decay or rust as aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large deal of damage to your home, making it very dangerous and potentially fatal. You should take the time to ensure that your windows are in good condition.

Single-pane windows are relatively simple to replace and typically fit into frames that were previously in use very easily. However If you have double glazed window repairs-pane windows that are anchored by internal beading, it'll be more difficult to take out the panes that are in place and replace them with new ones. In this situation you'll need to source some plastic spacers that aid the new pane in being able to fit perfectly into the window frame.

Wearing eye protection and heavy gloves is a must for anyone who plans to remove the glass yourself. You should also lay down a drop cloth before you begin working on the window panes, so that any shards fall onto the fabric, not onto the floor which could cause them to be trampled under.

Once the glass is removed, it's a good idea to seal the gap with clear packaging tape or duct tape to prevent water and drafts from entering the property until a professional is able to come out and repair the window. This will also act as a barrier, preventing any intruders to gain access to your home. If the gap is particularly large, you might think about an alarm door that comes with an integrated window as it will provide the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber sash windows. However, over time they can suffer from a variety of issues, including sagging. A sagging uPVC windows can cause problems with light, draughts, and even security. It's important to take action immediately if you realize that your uPVC windows are falling down.

To repair a window that is sagging, you can try to reposition the hinges. To accomplish this, you'll need to open the window so that you can get to the frame. Then, remove both the top and bottom hinges using a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after you have repositioned your hinges. If you are happy with the size of the window, tighten the screws to keep them in place.

If you cannot reposition the hinges, window repair you could need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, leading them to loose their elasticity. If this happens, it's crucial to replace the seal as fast as you can to ensure that your uPVC windows are waterproof and secure from draughts.

uPVC handles may also become loose. This is typically caused by screws that have been removed over time, but it could also be due to the handle mechanism wears out. It's relatively simple to fix a loose uPVC handle. The first step is to close your window and do an initial test fit. The corner joints of the sash should be aligned with the casing joint. If it isn't, you can use a screwdriver or a wrench to loosen the handle and then turn the mechanism back into the position it was in.

3. Water Leaks

If you wake up to wet floors and damp walls every time it rains it is important that you take action. Windows that leak water do can not only cause degradation of your home's structure but also hinder your efforts to control the temperature within your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame is damaged or is missing.

This is a relatively easy fix that can be completed by any DIY expert. Depending on the severity of the problem the old caulking may need to be removed before a fresh layer can be put on. It is essential to remember that when it comes to uPVC window Repair repairs, you should not be tempted to 'over-caulk in order to make the area harder to clean and decrease the efficiency of your energy usage.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more serious situations, you might have to consider replacing the window.

Mold spots and rotten sills are another sign of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the house.

It is also important to note that if the leakage originates from the glass in your double glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sagging. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and blow open in a breeze it could be hinges at fault. These are easily replaced by any competent DIYer and can be completed in just a few minutes.

Like any mechanical part hinges are prone to be damaged over time. It is very easy to change the hinges on a window however it is easier if someone helps you hold the frame.

Check that the uPVC hinges are open and closed in the correct direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The problem can be caused either by opening the window incorrectly or a faulty installation in the factory. Sending us a picture via our website is often enough to solve the issue. We are always happy to offer suggestions.

Regular lubrication of the hinges is also necessary. Applying a light engineering lubricant on the hinges is an ideal method of doing this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also decreases the possibility of a window getting stuck and stop corrosion. The ideal time to perform this every year. WD40 or other solvent-based oils are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a few different things. The hinges may also become unbalanced due to wear, which can cause an opening between the frame and sash. If they're beyond repair, it may be necessary to get them re-aligned. The interlock may also become misaligned. This is located on the hinge side and might require to be cleaned. In some instances it is possible to replace the hinges.

These seals can wear down or become damaged over time, allowing air to escape. Installing high-quality weatherstripping is a good way to stop draughts. Replace the windows made of upvc with low-emissivity glasses. This will help control indoor temperatures and decrease the possibility of draughts.

The last way to reduce draughts effectively is by using a Draught-exclusion device. These are usually made of fabric tubes filled with a filler which can be hung over your window sill. These will help to block out cold air and keep your home warm and cozy!

With a little regular maintenance and repair your windows made of upvc will continue to provide a great level of security and insulation for your home. However, it is important to recognise that windows last for a certain period of time and they may reach the point when it's more efficient to replace them than fix them. So, if you are having issues with your upvc windows, it is always best to seek professional assistance immediately.