• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Sliding Patio Doors Repairs

Your sliding patio doors can bring the outdoors in to your home and increase the efficiency of your home's energy usage. However, with time, they may begin to show signs of wear and tear that require some maintenance.

The majority of sliding double glazed patio door repairs door issues are fairly simple to repair. Find out how you can keep your sliding patio doors looking and functioning like new.

Dirty or damaged Tracks

One of the main reasons for sliding patio doors that won't open is clogged or dirty tracks. Over time, dirt and grime from daily usage can accumulate on the track. This could cause the door jam to become damaged or break completely.

A regular cleaning of sliding doors and their tracks as part of your household chores can help to reduce the amount of accumulation. Start by brushing or vacuuming large pieces of debris off the tracks. Then make use of warm water and non-abrasive cleaning products such as dish soap to wipe them down. Vinegar can be added to your cleaning solution to help get rid of stubborn grease and dirt staining.

If your sliding door is still not moving smoothly even after you've completed these steps, this could be a sign that there is a more significant damage. This could require a professional to repair or replace the door. There are a few simple fixes you can make before calling a professional to avoid costly repairs or replacements.

Place a mat under your sliding doors. This will help to catch dirt before it gets to the tracks. Also, you should cut back any bushes or plants close to your sliding doors in order to reduce the amount of debris tracked into the tracks. Also, make sure you close the door properly so it doesn't slam into the tracks and cause damage to the rollers and wheels. By keeping your doors clean and well-lubricated, you can prolong their lifespan considerably.

Rollers that are not aligned

Occasionally the sliding patio door may become unbalanced or becomes stuck. This usually happens due to dirt, or other obstructions which can be easily removed. But sometimes it can be due to bent tracks or rollers. In this case, you can realign the rollers by taking them off using the adjustment screws and cleaning with rubbing alcohol. Be cautious because these parts are fragile.

If your doors still stick then you could try using lubricants on the rollers to reduce friction and make it easier for them to slide. It is recommended to use a silicone-based lubricant, as petroleum-based ones can draw dirt more quickly. It is also important to clean the rollers and tracks prior to lubricating them.

Once you've cleaned the rollers, you are able to reinstall them with the adjustment screws. It's recommended to make use of the same lubricant as you used for cleaning them. When you are reinstalling the rollers make sure you push them all the way into their channels. You can then test your door to determine whether it is now sliding effortlessly.

If the problem persists, it might be necessary to uninstall your door and inspect the tracks and rollers for any more serious issues. If the wheels or tracks are bent in a way, you may need to replace them. It's best to hire a professional to install the rollers or tracks in this scenario.

Warped Glass

Sliding glass doors are convenient for bringing the outdoors and natural sunlight into a space, but they can also be susceptible to damage that requires repair or replacement. Cracking, warping, and fading are some of the most common problems. Warping happens when the materials that comprise your sliding glass patio door start to degrade due to sun, heat and other environmental elements. Cracks are often caused by impact damage, such as from a ball or lawn mower run-in, and fading generally occurs due to repeated contact with sunlight or other elements found in nature.

If you have sliding glass patio doors that aren't easy to close and open, this could be an indication that the rollers and tracks do not work correctly. This issue may result from the accumulation of dirt, rust, or debris in the track, wheels that are not aligned or the lack of lubrication. Cleaning the rollers and tracks clearing obstructions and applying silicone spray can help solve this issue.

The locking mechanism may also be defective and make it difficult to open or close your sliding patio doors. It could be due to misalignment, wear and tear or the combination of both. To fix this issue, simply adjust the locking mechanism by turning the adjustable screws located at the bottom.

Drafts or air leaks that occur around your sliding patio doors are a common issue that can greatly decrease their energy efficiency. They usually result from damaged weather stripping or an improper alignment of the door that can be easily fixed by replacing the weather stripping and realigning the doors.

Loose Handle

It can be frustrating when the handle of sliding doors becomes loose. It makes it difficult to open the door. This problem is usually caused by an incorrectly aligned locking mechanism which can be corrected by loosening the screws that hold it in place and tightening them until they're snug against the jamb of the door.

Another common reason for a handle to become loose is that it has become detached from the spindle that connects it to the handles on the exterior and interior. This is usually caused by a variety of reasons, including excessive use, wear-and-tear, or simply general ageing. If the issue isn't addressed quickly, the handle can become loose and fall off.

To resolve this issue to fix it, you must first find the screws that connect the handles' exterior and interior. These screws are usually hidden behind tabs of plastic which can be removed using a flathead (or a Phillips head screwdriver in some instances) screwdriver. It's a good idea store these screws somewhere safe so that you don't lose them.

After removing the handles the next step will be to take off the spindle. This can be accomplished by tapping on the end with a hammer or mallet until it falls free from its place inside the door. The new handle is fitted by placing the spindle in the hole for the handle inside and the other end through the hole on the outside of the handle. Once the handle is in place it can be tightened by screwing the screws back in and then examining to confirm that the lock and unlock mechanisms work correctly.

Faulty Weatherstripping

Weatherstripping that is damaged or cracked can allow water and air to seep into your patio door, which can compromise your home's comfort and energy efficiency. In addition to letting in moisture, it can also cause drafts and increase your heating or cooling costs. Fortunately, replacing faulty weatherstripping is an easy repair that doesn't require professional help. You can take off the old weatherstripping by loosening the staples with the help of a screwdriver or by gently prying it with a putty knife and taking it off the door. Then, you can clean the area, and then apply an additional layer of weatherstripping that is secured with an adhesive. This will stop leaks and improve the comfort.

If your sliding patio doors are no longer functioning as they should, it's important to fix the issue as soon as possible to avoid further damage and keep them functional for years to come. Depending on the severity of the issue, DIY or professional repair/replacement may be the best choice.

The most frequent issues that arise that are encountered with sliding patio doors are dirty rollers due to debris in the tracks, misaligned wheels and a loose handle. In the majority of instances, these issues can be addressed by regular maintenance and cleaning, including lubricating the track and rollers, as well as adjusting them and tightening hardware. If these steps don't work, it's best to seek professional advice to ensure that your patio door is operating just as it should. Before you decide to replace or repair your patio door, be sure to check its warranty information to make sure that it's covered by the manufacturer's warranty. This will save you money on repairs or replacements in the near future.