• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Window Handle Replacement

It's easy to replace a broken window handle with the right tools. It is essential to know the type of handle you have and its spindle size before purchasing the replacement.

Older uPVC windows feature handles with cockspurs, which have an extension spur that can secure a wedge-shaped cockspur striker plate. They can be left- or right-handed and should be compatible when replaced.

What kind of lock and handle do I have?

There are a myriad of windows locks and handles made of upvc, each with its own advantages and purposes. The type of handle that you own will determine if your locking mechanism is efficient and if it is easy to open the windows. With time and regular use, the upvc handles on your windows can be damaged and worn out. This makes them less secure and effective. In some cases they could even fall off completely. If you notice that your upvc window panes replacement handles have fallen off, it is essential to repair them as quickly as you can. This will help prevent burglaries, and keep your house safe.

It's an easy task that anyone can complete. With just a few tools and the right knowledge, this is a simple process that shouldn't take longer than a couple of minutes. You will need to know the type of lock or handle you have on your window. This will allow you to choose the correct replacement.

Inline Espagnolette Handles

They are typically located on the outside of the window. They are flat and feature an open latch that is connected to the locking mechanism of the window frame. Inline upvc handles come with a spindle that runs through the middle of the handle and into the window frame to operate the latch.

Cockspur Handles

These handles are typically found on older uPVC windows and feature an distinctive hook-shaped design. Cockspur handles are secured to the frame of the window by only one screw and are less secure than other varieties of window handles.

Tilt and Turn Handles

The tilt and turn handles are different from other upvc handles in that they can be turned to open the window and then tilted to the window to let air circulate. They have a 7mm spindle at the back and are available in left and right-handed versions.

When you are purchasing replacement handles for upvc it is essential to measure the spindle's length as not all are identical in size. To determine the length of your handle made of upvc, simply drop something in the middle of the hole and measure how far it extends before meeting an obstruction. This is the maximum spindle length that will be suitable for your window.

What is a spindle?

uPVC window handles operate in a similar way like doors, turning the handle to activate an internal latch within the frame. This unlocks the window to allow it to be closed and opened. However, sometimes handles can be damaged, especially if they are regularly used or exposed to harsh weather conditions. You may need to replace the handles on your uPVC window if they are not able to operate it properly.

There are a variety of uPVC handles available comprising Espag, Cockspur and Spaded handles. They are designed to fit inside the uPVC frames in various ways, and each type of handle uses a specific spindle to lock the mechanism to the window. It is crucial to know the type of handle you have installed on your uPVC windows to ensure that you replace it with a suitable one.

You can check what type of uPVC handle you have by inspecting the base of your handle. A snap-in covers should be over the screw that holds the base of the handle in place. Remove this and then you should be able see the second holding screw located at the opposite end of the base of the handle. Once both screws have been removed, you should be able remove the handle from the uPVC.

Once you have removed the uPVC window handle, you have to remove the old spindle from the locking mechanism. Make note of the length of the spindle, as you'll need to make sure that you buy one that is the same length as the original handle and locking mechanism.

The spindle wears down and is unable to operate the locking mechanism. This can be due to wear and tear from continuous use, a loosening of the locking mechanism or even corrosion over time. If this occurs, you will need to replace both the window handle and the locking mechanism to restore the full functionality of your uPVC Windows.

How do I remove the old handle?

Window handles are susceptible to being damaged or destroyed over time. It is essential to fix them as soon as you can to ensure your safety. It is easy to replace a worn or damaged handle. The job can be accomplished in less than a minute without the need for special tools.

To take off the handle, you first need to remove the screw at the bottom of the handle. After the screw is removed, the handle can be removed. There will be a second screw that is located at the bottom of the handle's base, and it can be removed as well. Once these two screws are removed, the handle can be detached from the base of the window.

Once the old handle has been removed, you can take the new handle and line up the fixing holes with the holes present in the window frame. There may be a tiny cap or sticker on the new handle, so remove them if needed and then put the handle in its place. It is crucial to verify that the handle is working after it has been installed. Turn the handle and ensure that the lock mechanism is in place.

Espag handles have a spindle that protrudes from the handle and slots into a multipoint locking mechanism inside the window frame. Cadenza windows have a blade with cutouts which fit into the lock mechanism. Cockspur handles are long and hook over the frame of the window or the transom bar crossmember.

Once you have the new handle in place, you can insert the spindle inside the window lock and then tighten it. Replace the snap-in cover and screw cap (if appropriate) after the handle is fixed. When the handle is ready to use, open and close the window a few times to make sure that it functions correctly and securely.

How do I put in the new handle?

The process of changing your window handle made of uPVC isn't difficult and the process is simple. All you need is an screwdriver and a bit of perseverance. First, ensure that the handle is not locked. Then remove any visible screws. You could also replace them with screw caps. After removing the handle, you'll need to record the length of spindle that extends from the back. This is crucial as it will determine the type of handle that you will need to buy.

Espagnolette handles made of uPVC are the most sought-after kind of handle. The spindle is inserted into the handle to activate the locking mechanism inside the window frame. When the handle is turned, it opens the latch on the window and allows it to open. Over time and through regular use, espagnolette handles may become damaged or impaired which is why it is essential to locate an alternative.

Cadenza handles are a different kind of uPVC window handle that is commonly used on tilt and turn windows. They have an extended blade that works the multipoint locking mechanism inside the window. They are more secure than the espagnolette handle as they can only open from the inside. You can replace them using the same method that you would with espagnolette handles however, ensure that the new handle is angled and not flat.

Once you have decided on the correct handle to purchase You can simply align the new handle with the screw holes and then screw it into place. Then, put the screw covers on and test the new handle. This is accomplished by shifting the handle from the locked position to the unlocked and vice versa a few times. It may be worth contacting an expert to see whether you can solve any issues. They will often be able to guide you on the best approach to solve the issue in a quick and efficient manner.