• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Maintain a Woodburning Stove

A woodburning stove can be a powerful, effective way to heat your home. It is important to maintain your stove to ensure maximum performance.

Tips: Choose seasoned wood that is low in the amount of moisture. This will give you more time to burn and more heat output.

State environmental agencies are struggling with how to address the problem of particulate air pollution from old wood burning stoves.

How They Work

Wood-burning stoves, as the name implies use wood to generate heat. The fire is contained within a metal-and-glass body which assists in maintaining a constant temperature within the home. It also serves as a barrier to smoke from entering your living space.

The most common way stoves regulate the combustion process is through regulating the amount of air they allow into the fire. This is done by opening and closing one or more air vents.

Modern stoves usually use catalytic or non-catalytic technology in order to control this. Catalytic stoves are equipped with a catalytic convertor that is designed to reburn gases produced during primary combustion, so they do not escape from the room. Non-catalytical stoves don't have an catalyser but rely on secondary combustion inside the firebox in order to reduce emissions.

It is recommended to only burn firewood that is seasoned in your wood-burning fireplace. It should have a moisture content lower than 20%, which allows the fire to burn effectively. This will lessen the amount of the amount of smoke and harmful pollutants that escape from the flue. It will also prevent the glass of your stove from getting blackened by creosote. Creosote is the by-product of burning wood and can build up over time.

In addition to reducing emissions, the right kind of wood can save money on heating costs, as it will produce more heat for a given amount of fuel. This is because the surface area of the wood that is drier is larger and produces more heat per volume.

Wood smoke can be harmful to anyone, but it is especially harmful to children and adults with vulnerable lungs. It can also irritate those suffering from lung diseases such as asthma or chronic obstructive lung disease (COPD). If you reside in a designated smoke control zone, make sure your stove is properly seasoned. It should also be equipped with a chimney that is in compliance with the local standards.

Burning Wood

Woodburning stoves offer clean energy source that is also a great choice to keep your home warm during power outages. They also help reduce carbon dioxide emissions, which can be harmful for the environment, from fossil fuels such as oil and 913875 gas.

Modern woodburning stoves operate more efficiently than older models and are designed to prevent creosote build-up, but it is still essential to monitor the process of combustion. Creosote is a risky by-product of a poorly burned fire and can clog up the chimney if left to accumulate, leading to lower efficiency and posing an hazard to fire. Using wood that is seasoned will help keep creosote levels low and can reduce the cost of logs as well as helping avoid the need for professional cleaning services.

There are stoves that burn coal and wood, giving you a choice between carbon-neutral sources of energy. It is crucial to keep in mind that coal is not a climate friendly fuel and there are concerns about how it is mined.

It is best to use the Defra approved stove, and ideally one that is also Ecodesign ready, since they are in line with the most recent emission regulations. The UK building regulations dictate the type of flue as well as the size of the hearth, and the distance between the stove and combustible material. It is always best to speak with our stove experts prior to purchasing a stove.

Other combustibles, like paper and garbage should not be used in wood-burning stoves as they could cause more pollution, and at worst, an explosion in the chimney, and at best cause them to operate less effectively. Other combustibles are less dense than firewood and therefore will burn at lower temperatures and produce more particles.

It is important to use only well-seasoned, split, and dried firewood. This will burn more efficiently. Dry or damp wood generates more smoke and pollution. It is also recommended that you use a good quality stove pipe to make sure that the flue temperatures are sufficient and that it has been installed correctly.

Emissions

Woodburning stoves release a range of gases and particles. Mostly they produce fine particulate matter (PM2.5) that is small enough to penetrate the lungs and enter the bloodstream, which could harm the heart, liver and brain. They also produce carcinogenic substances such as polycyclic aromatic Hydrocarbons (PAHs) as well as nitrogen oxides and carbon monoxide. Some even spit out toxic metals like mercury and arsenic, depending on what they're burning.

In the US There have been a number of attempts to regulate how much pollution woodburning stoves can produce with varying degrees of success. In 1988, the Environmental Protection Agency set emissions guidelines that basically limited how much pollution new stoves could emit. Since the time, there have been two revisions to the regulations. The most recent one, in 2015 stipulates that all units whether catalytic or not, release no more than 4 grams of pollution each hour.

These strict regulations led to a major shake-up of the industry, forcing hundreds of smaller companies out of business. However they also spurred a race to design efficient stoves that could last and could produce lower emissions than traditional models. To improve their products, 913875.Xyz (Www.913875.xyz) stove designers studied and analyzed combustion flow baffles, combustion chamber shapes. They also studied insulating materials and recirculation system. In time, they were successful.

Emissions are mostly dependent on the moisture content of the wood burned. The higher the moisture level is, the more pollutants the stove will produce. The most effective way to reduce the amount of emissions is making use of seasoned firewood that has been properly dried over a period of 6-8 months.

According to several studies that compare pollution from exhaust only, a woodburning stove can produce as much particle contamination as 15 diesel vehicles. These tests were not scientifically based. However, these studies fail to take into consideration that approximately half of car's particle pollution comes from the brakes, engine and tyres rather than its exhaust.

Ten blue states have been pressing on the EPA to review its carbon emissions and guidelines for air quality of wood-burning stoves. Attorney generals from New York, Washington, Illinois, Massachusetts, Maryland, Minnesota, California, Alaska, Oregon and Vermont have announced plans to take on the EPA for continuing to allow high-emitting stoves to be sold and installed in homes across the nation.

Maintenance

While woodburning stoves can be extremely efficient in heating homes, they can be difficult to maintain. To ensure that your stove is clean and functioning efficiently, you'll need to clean it regularly. A dirty stove can affect the health of its occupants and how much heat it generates. In addition to cleaning the stove, there are other maintenance tasks that should be performed to ensure it works well.

It is easy to clean the interior and exterior of a stove. It is recommended to clean the stove on a weekly or fortnightly basis based on the frequency it is used. It is also recommended to empty the ash from the fire box each time after the stove has been used. Spread newspaper on the floor and wear gloves when taking the ashes out. Make use of a metal container instead of a bucket to avoid the rusting.

Keeping the flue and chimney clean is also essential. It is a good idea to hire an experienced chimney sweeper once or twice per year to thoroughly clean the chimney and stove. This will stop the buildup of creosote and reduce the risk for chimney fires.

A chimney should also be examined for cracks and creosote buildup, bird nests and other detritus. A professional chimney sweep can fix these issues to create a safe and working chimney.

Over time, the glass of a wood-burning stove can be clouded and stained with soot. Spray an ammonia-based mixture and water on the glass and wipe it with a clean cloth. Avoid scratching the glass, since this can cause it to cause it to shatter and weaken when hot.

Paint that is resistant to heat can be used to re-paint wood burning fireplace in the event that the paint begins to chip. These paints are generally found at stores where stoves are sold and can be found in a variety of colors.